$A$ wire is loaded by $6 \ kg$ at its one end,the increase in length is $12 \ mm$. If the radius of the wire is doubled and all other magnitudes are unchanged,then the increase in length will be ......... $mm$.

Longitudinal stress of $1\,kg/mm^2$ is applied on a wire. The percentage increase in length is $(Y = 10^{11}\,N/m^2)$. (in $\%$)

$A$ $0.1 \,kg$ mass is suspended from a wire of negligible mass. The length of the wire is $1 \,m$ and its cross-sectional area is $4.9 \times 10^{-7} \,m^2$. If the mass is pulled a little in the vertically downward direction and released, it performs simple harmonic motion of angular frequency $140 \,rad \,s^{-1}$. If the Young's modulus of the material of the wire is $n \times 10^9 \,N \,m^{-2}$, the value of $n$ is

The mass and length of a wire are $M$ and $L$ respectively. The density of the material of the wire is $d$. On applying a force $F$ on the wire,the increase in length is $l$. Then,the Young's modulus of the material of the wire will be:

$A$ rigid bar of mass $15\; kg$ is supported symmetrically by three wires each $2.0\; m$ long. Those at each end are of copper and the middle one is of iron. Determine the ratio of their diameters if each is to have the same tension.

The area of cross-section of a wire of length $1.1 \, m$ is $1 \, mm^2$. It is loaded with $1 \, kg$. If Young's modulus of copper is $1.1 \times 10^{11} \, N/m^2$,then the increase in length will be ......... $mm$ (Take $g = 10 \, m/s^2$)