An e.m.f. $E=4 \cos (1000 t)$ volt is applied to an $LR$ circuit of inductance $3 \ mH$ and resistance $4 \ \Omega$. The maximum current in the circuit is

In a circuit,$L, C$ and $R$ are connected in series with an alternating voltage source of frequency $f$. The current leads the voltage by $45^o$. The value of $C$ is

In a series $R-C$ circuit shown in the figure,the applied voltage is $10\, V$ and the voltage across the capacitor is found to be $8\, V$. Then,the voltage across $R$ and the phase difference between the current and the applied voltage will respectively be

When a coil is connected across a $20 \ V$ $DC$ supply,it draws a current of $5 \ A$. When it is connected across a $20 \ V, 50 \ Hz$ $AC$ supply,it draws a current of $4 \ A$. The self-inductance of the coil is .............. $mH$. (Take $\pi=3$)

In a series $LCR$ circuit,the voltages across the capacitor,resistor,and inductor are in the ratio $2:3:6$. If the voltage of the ac source in the circuit is $240 \ V$,then the voltage across the inductor is (in $V$)

An inductance coil has a resistance of $80 \Omega$. When an $AC$ signal of frequency $480 \text{ Hz}$ is applied to the coil,the voltage leads the current by $45^{\circ}$. The inductance of the coil in henry is $\left[\sin 45^{\circ}=\cos 45^{\circ}=1 / \sqrt{2}\right]$