At time $t = 0$,terminal $A$ in the circuit shown in the figure is connected to $B$ by a key and alternating current $I(t) = I_0 \cos(\omega t)$,with $I_0 = 1 \text{ A}$ and $\omega = 500 \text{ rad s}^{-1}$ starts flowing in it with the initial direction shown in the figure.
At $t = \frac{7\pi}{6\omega}$,the key is switched from $B$ to $D$. Now onwards only $A$ and $D$ are connected. $A$ total charge $Q$ flows from the battery to charge the capacitor fully. If $C = 20 \mu\text{F}$,$R = 10 \Omega$ and the battery is ideal with emf of $50 \text{ V}$,identify the correct statement$(s)$.
$(A)$ Magnitude of the maximum charge on the capacitor before $t = \frac{7\pi}{6\omega}$ is $1 \times 10^{-3} \text{ C}$.
$(B)$ The current in the left part of the circuit just before $t = \frac{7\pi}{6\omega}$ is clockwise.
$(C)$ Immediately after $A$ is connected to $D$,the current in $R$ is $10 \text{ A}$.
$(D)$ $Q = 2 \times 10^{-3} \text{ C}$.

  • A
    $(B, C)$
  • B
    $(B, D)$
  • C
    $(C, D)$
  • D
    $(A, D)$

Explore More

Similar Questions

In a copper voltameter,the mass deposited in $6 \text{ min}$ is $m \text{ g}$. If the current-time graph for the voltameter is as shown in the figure,then the $E.C.E.$ of the copper is:

Difficult
View Solution

The temperature coefficient of resistance of tungsten is $4.5 \times 10^{-3} \, ^{\circ}C^{-1}$ and that of germanium is $-5 \times 10^{-2} \, ^{\circ}C^{-1}$. $A$ tungsten wire of resistance $100 \, \Omega$ is connected in series with a germanium wire of resistance $R$. The value of $R$ for which the resistance of the combination does not change with temperature is .......... $\Omega$.

Two cables of copper are of equal lengths. One of them has a single wire of area of cross-section $A$, while the other has $10$ wires of cross-sectional area $A / 10$ each. Determine their suitability for transporting $A.C.$ and $D.C.$

$A$ steel wire has a resistance twice that of an aluminium wire. Both of them are connected to a constant voltage supply. More heat will be dissipated in:

Due to cold weather,a $1\, m$ water pipe of cross-sectional area $1\, cm^2$ is filled with ice at $-10^{\circ}C$. Resistive heating is used to melt the ice. $A$ current of $0.5\, A$ is passed through a $4\, k\Omega$ resistance. Assuming that all the heat produced is used for melting,what is the minimum time required? (In $s$)
(Given: latent heat of fusion for water/ice $= 3.33 \times 10^5\, J/kg$,specific heat of ice $= 2 \times 10^3\, J/(kg\cdot K)$ and density of ice $= 10^3\, kg/m^3$)

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo