At time t=0 text{ s}, the voltage of an AC ge | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The instantaneous voltage of an $AC$ generator is given by $V = V_m \sin(\omega t)$, where $V_m$ is the peak voltage and $\omega = 2 \pi 
u$ is t

Vedclass · Accepted Answer

$1$

Vedclass · Answer

(B) The instantaneous voltage of an $AC$ generator is given by $V = V_m \sin(\omega t)$, where $V_m$ is the peak voltage and $\omega = 2 \pi 
u$ is the angular frequency.Given: $V_m = 100 	ext{ V}$, $V = 2 	ext{ V}$ at $t = \frac{1}{100 \pi} 	ext{ s}$.Substituting these values into the equation:$2 = 100 \sin\left(2 \pi 
u 	imes \frac{1}{100 \pi}ight)$$2 = 100 \sin\left(\frac{
u}{50}ight)$$\frac{2}{100} = \sin\left(\frac{
u}{50}ight)$Since the angle $\frac{
u}{50}$ is very small, we can use the approximation $\sin(	heta) \approx 	heta$:$\frac{1}{50} = \frac{
u}{50}$$
u = 1 	ext{ Hz}$.

At time $t=0 \text{ s}$, the voltage of an $AC$ generator starts from $0 \text{ V}$ and becomes $2 \text{ V}$ at time $t=\frac{1}{100 \pi} \text{ s}$. The voltage increases up to $100 \text{ V}$, after which it starts to decrease. Find the frequency of the generator. (in $\text{ Hz}$)

Similar Questions

The alternating current is given by $i = \left\{\sqrt{42} \sin \left(\frac{2 \pi}{T} t\right) + 10\right\} \text{ A}$. The $r.m.s.$ value of this current is $\text{A}$.

In an a.c. circuit $I=100 \sin 200 \pi t$. The time required for the current to achieve its peak value will be

The output voltage of a step-down transformer is measured to be $24 \text{ V}$, when connected to a $12 \text{ W}$ light bulb. The value of the peak current is . . . . . . .

An $AC$ source has a voltage of $220V$ and a frequency of $50\,Hz$. How much time (in $sec$) does it take for the voltage to reach zero from its maximum value?

The $r.m.s.$ value of the given current $I = I_0 + I_1 \sin \omega t$ is

Vedclass Test Series

Exam Paper Generator

Online Exam Module