By ammeter,which of the following can be measured?

$A$ galvanometer has $30$ divisions and a current sensitivity of $20 \, \mu A$ per division. Its resistance is $25 \, \Omega$. How will you convert this galvanometer into a voltmeter of $1 \, V$ range? (Find the series resistance in $\Omega$)

The deflection in a moving coil galvanometer of resistance $45 \Omega$ falls from $30$ divisions to $3$ divisions. The length of the shunt wire required to convert the galvanometer into an ammeter is [specific resistance of the material of the shunt wire $= 5 \times 10^{-7} \Omega m$ and area of cross-section of the wire $= 4 \times 10^{-7} m^2$]. (in $m$)

$A$ galvanometer has resistance '$G$' and range '$V_g$'. How much resistance is required to read voltage up to '$V$' volt?

$A$ moving coil galvanometer is converted into an ammeter of range $0$ to $5 \, mA$. The galvanometer resistance is $90 \, \Omega$ and the shunt resistance has a value of $10 \, \Omega$. If there are $50$ divisions in the galvanometer-turned-ammeter on either side of zero, its current sensitivity is

$A$ galvanometer coil of resistance $50 \,\Omega$ shows full-scale deflection for a current of $100 \,\mu A$. The shunt resistance to be added to the galvanometer to convert it into an ammeter of range $10 \, mA$ is: