$A$ dynamo is a device for converting:

Match the List-$I$ with List-$II$:

List-$I$	List-$II$
$A$. Magnetic induction	$I$. $MLT^{-2}A^{-2}$
$B$. Magnetic flux	$II$. $ML^2T^{-2}A^{-2}$
$C$. Magnetic permeability	$III$. $ML^0T^{-2}A^{-1}$
$D$. Self inductance	$IV$. $ML^2T^{-2}A^{-1}$

Choose the correct answer from the options given below:

What length of wire is required to construct a solenoid of length $l_0$ and inductance $L$?

$A$ thin conducting rod $MN$ of mass $20 \text{ g}$,length $25 \text{ cm}$ and resistance $10 \text{ }\Omega$ is held on frictionless,long,perfectly conducting vertical rails as shown in the figure. There is a uniform magnetic field $B_0 = 4 \text{ T}$ directed perpendicular to the plane of the rod-rail arrangement. The rod is released from rest at time $t = 0$ and it moves down along the rails. Assume air drag is negligible. Match each quantity in List-$I$ with an appropriate value from List-$II$,and choose the correct option. [Given: The acceleration due to gravity $g = 10 \text{ m s}^{-2}$ and $e^{-1} = 0.4$]

List-$I$	List-$II$
$(P)$ At $t = 0.2 \text{ s}$,the magnitude of the induced emf in Volt	$(1)$ $0.07$
$(Q)$ At $t = 0.2 \text{ s}$,the magnitude of the magnetic force in Newton	$(2)$ $0.144$
$(R)$ At $t = 0.2 \text{ s}$,the power dissipated as heat in Watt	$(3)$ $1.20$
$(S)$ The magnitude of terminal velocity of the rod in $\text{m s}^{-1}$	$(4)$ $0.12$
	$(5)$ $2.00$

The current $i$ in an inductance coil varies with time $t$ according to the following graph. Which of the following plots shows the variation of voltage $V$ in the coil?

$A$ magnet $NS$ is suspended from a spring and while it oscillates,the magnet moves in and out of the coil $C$. The coil is connected to a galvanometer $G$. Then as the magnet oscillates,