For a long current-carrying solenoid,the magnetic field inside is $0.6 \ T$. The magnetic energy per unit volume is . . . . . . .

$A$ long cylindrical wire of radius $R$ carries a uniform current $I$ flowing through it. The variation of magnetic field $B$ with distance $r$ from the axis of the wire is shown by:

$A$ magnetic field of $100 \;G$ $(1 \;G = 10^{-4} \;T)$ is required which is uniform in a region of linear dimension about $10 \;cm$ and area of cross-section about $10^{-3} \;m^2$. The maximum current-carrying capacity of a given coil of wire is $15 \;A$ and the number of turns per unit length that can be wound round a core is at most $1000 \;turns \;m^{-1}$. Suggest some appropriate design particulars of a solenoid for the required purpose. Assume the core is not ferromagnetic.

$A$ closely wound solenoid of $80 \,cm$ long has $5$ layers of windings of $400$ turns each. The diameter of the solenoid is $1.8 \,cm$. If the current carried is $8 \,A$, then the magnitude of the magnetic field inside the solenoid near its centre is approximately

Using Ampere's circuital law,derive the expression for the magnetic field at a perpendicular distance $r$ from an infinitely long current-carrying wire. Explain it.

Two coaxial solenoids $1$ and $2$ of the same length are placed such that one is inside the other. The number of turns per unit length are ${n_1}$ and ${n_2}$. The currents ${i_1}$ and ${i_2}$ are flowing in opposite directions. The magnetic field inside the inner coil is zero. This is possible when: