For the shown figure,calculate the equivalent | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The thermal resistance of a material is given by $R = \frac{l}{KA}$,where $l$ is the length,$A$ is the area,and $K$ is the thermal conductivity.$1

Vedclass · Accepted Answer

$\frac{3l}{{KA}}$

Vedclass · Answer

(B) The thermal resistance of a material is given by $R = \frac{l}{KA}$,where $l$ is the length,$A$ is the area,and $K$ is the thermal conductivity.$1$. For the first section (left): There are three parallel bricks each of length $l$ and area $A/3$. The resistance of each brick is $R_1 = \frac{l}{K(A/3)} = \frac{3l}{KA}$. Since they are in parallel,the equivalent resistance $R_{eq1}$ is $\frac{1}{R_{eq1}} = \frac{1}{R_1} + \frac{1}{R_1} + \frac{1}{R_1} = \frac{3}{R_1} = \frac{3}{3l/KA} = \frac{KA}{l}$. Thus,$R_{eq1} = \frac{l}{KA}$.$2$. For the middle section: There is a single brick of length $l$ and area $A$. The resistance is $R_{eq2} = \frac{l}{KA}$.$3$. For the third section (right): There are two parallel bricks each of length $l$ and area $A/2$. The resistance of each brick is $R_3 = \frac{l}{K(A/2)} = \frac{2l}{KA}$. Since they are in parallel,the equivalent resistance $R_{eq3}$ is $\frac{1}{R_{eq3}} = \frac{1}{R_3} + \frac{1}{R_3} = \frac{2}{R_3} = \frac{2}{2l/KA} = \frac{KA}{l}$. Thus,$R_{eq3} = \frac{l}{KA}$.$4$. Since these three sections are in series,the total equivalent thermal resistance is $R_{total} = R_{eq1} + R_{eq2} + R_{eq3} = \frac{l}{KA} + \frac{l}{KA} + \frac{l}{KA} = \frac{3l}{KA}$.

For the shown figure,calculate the equivalent thermal resistance if the bricks are made of the same material of thermal conductivity $K$.

Similar Questions

$A$ wall is made of two layers of thickness $1\ cm$ and $4\ cm$ and thermal conductivities $K$ and $3K$ respectively. If the temperature difference across the wall is $50\ ^oC$,then the temperature difference across the thin layer will be

Four rods of the same material and having the same cross-section and length have been joined as shown in the figure. The temperature of the junction of the four rods will be ............... $^{\circ}C$.

Two walls have thicknesses $d_1$ and $d_2$ and thermal conductivities $k_1$ and $k_2$,respectively. In the steady state,the temperatures of the outer surfaces are $T_1$ and $T_2$. What is the temperature at the interface of the two walls?

Four identical conducting rods are joined as shown in the figure. Points $A$ and $D$ are maintained at temperatures of $200^{\circ}C$ and $20^{\circ}C$ respectively. The temperature of junction $B$ will be ....... $^{\circ}C$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module