Given below are two statements:
Statement $I$: In a vernier callipers,one vernier scale division is always smaller than one main scale division.
Statement $II$: The vernier constant is given by one main scale division multiplied by the number of vernier scale division.
In the light of the above statements,choose the correct answer from the options given below.

The main scale of a vernier caliper reads in millimeters and its vernier scale is divided into $8$ divisions,which coincide with $5$ divisions of the main scale. When the two jaws of the instrument touch each other,the zero of the vernier scale coincides with the zero of the main scale. $A$ rod is placed between the two jaws. It is observed that the zero of the vernier scale lies just to the left of the $36^{th}$ division of the main scale and the fourth division of the vernier scale coincides with a main scale division. The measured value is .......... $cm$.

Consider the diameter of a spherical object being measured with the help of a Vernier callipers. Suppose its $10$ Vernier Scale Divisions $(V.S.D.)$ are equal to its $9$ Main Scale Divisions $(M.S.D.)$. The least division on the $M.S.$ is $0.1 \ cm$ and the zero of $V.S.$ is at $x=0.1 \ cm$ when the jaws of the Vernier callipers are closed. If the main scale reading for the diameter is $M=5 \ cm$ and the number of the coinciding vernier division is $8$,the measured diameter after zero error correction is: (in $cm$)

There are $100$ divisions on the circular scale of a screw gauge of pitch $1 \,mm$. With no measuring quantity in between the jaws,the zero of the circular scale lies $5$ divisions below the reference line. The diameter of a wire is then measured using this screw gauge. It is found that $4$ linear scale divisions are clearly visible while $60$ divisions on the circular scale coincide with the reference line. The diameter of the wire is: (in $\,mm$)

In an experiment to find out the diameter of a wire using a screw gauge,the following observations were noted:
$(a)$ The screw moves $0.5\,mm$ on the main scale in one complete rotation.
$(b)$ Total divisions on the circular scale $= 50$.
$(c)$ Main scale reading is $2.5\,mm$.
$(d)$ The $45^{\text{th}}$ division of the circular scale is on the pitch line.
$(e)$ The instrument has a $0.03\,mm$ negative zero error.
Then the diameter of the wire is $...........\,mm$.

When the gap is closed without placing any object in a screw gauge whose least count is $0.005 \ mm$,the $5^{th}$ division on its circular scale coincides with the reference line on the main scale. When a small sphere is placed,the reading on the main scale advances by $4$ divisions,whereas the circular scale reading advances by five times the corresponding reading when no object was placed. There are $200$ divisions on the circular scale. The radius of the sphere is .......... $mm$.