Consider the diameter of a spherical object being measured with the help of a Vernier callipers. Suppose its $10$ Vernier Scale Divisions $(V.S.D.)$ are equal to its $9$ Main Scale Divisions $(M.S.D.)$. The least division on the $M.S.$ is $0.1 \ cm$ and the zero of $V.S.$ is at $x=0.1 \ cm$ when the jaws of the Vernier callipers are closed. If the main scale reading for the diameter is $M=5 \ cm$ and the number of the coinciding vernier division is $8$,the measured diameter after zero error correction is: (in $cm$)
- A$5.18$
- B$5.08$
- C$4.98$
- D$5.00$
Explore More
Similar Questions
The least count of the main scale of a screw gauge is $1\, mm$. The minimum number of divisions on its circular scale required to measure $5\,\mu m$ diameter of a wire is
$A$ specially designed Vernier calliper has the main scale least count of $1 \,mm$. On the Vernier scale,there are $10$ equal divisions and they match with $11$ main scale divisions. Then,the least count of the Vernier calliper is ........... $mm$.
MediumKVPY 2019
View SolutionThe least count of a screw gauge is $0.01 \ mm$. If the pitch is increased by $75\%$ and the number of divisions on the circular scale is reduced by $50\%$,the new least count will be . . . . . . $\times 10^{-3} \ mm$.
One main scale division of a vernier caliper is equal to $m$ units. If $n^{\text{th}}$ division of the main scale coincides with $(n+1)^{\text{th}}$ division of the vernier scale,the least count of the vernier caliper is:
DifficultJEE MAIN 2024
View SolutionArea of the cross-section of a wire is measured using a screw gauge. The pitch of the main scale is $0.5 \text{ mm}$. The circular scale has $100$ divisions and for one full rotation of the circular scale, the main scale shifts by two divisions. The measured readings are listed below.
Measurement condition Main scale reading Circular scale reading Two arms of gauge touching each other without wire $0$ division $4$ division Attempt-$1$: With wire $4$ division $20$ division Attempt-$2$: With wire $4$ division $16$ division
What are the diameter and cross-sectional area of the wire measured using the screw gauge?
| Measurement condition | Main scale reading | Circular scale reading |
| Two arms of gauge touching each other without wire | $0$ division | $4$ division |
| Attempt-$1$: With wire | $4$ division | $20$ division |
| Attempt-$2$: With wire | $4$ division | $16$ division |
What are the diameter and cross-sectional area of the wire measured using the screw gauge?
Vedclass Products
For Students
Vedclass Test Series
Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.
Start Free TrialFor Teachers
Exam Paper Generator
Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.
Try FreeFor Institutes
Online Exam Module
Live online exams with unlimited students, 360° analytics & white-label branding.
See Demo