$A$ specially designed Vernier calliper has the main scale least count of $1 \,mm$. On the Vernier scale,there are $10$ equal divisions and they match with $11$ main scale divisions. Then,the least count of the Vernier calliper is ........... $mm$.

If the screw on a screw gauge is given six rotations,it moves by $3\; mm$ on the main scale. If there are $50$ divisions on the circular scale,the least count of the screw gauge is:

In a screw gauge, the zero of the circular scale lies $3$ divisions above the horizontal pitch line when their metallic studs are brought in contact. Using this instrument, the thickness of a sheet is measured. If the pitch scale reading is $1 \ mm$ and the circular scale reading is $51$, then the correct thickness of the sheet is . . . . . . $mm$. [Assume least count is $0.01 \ mm$]

Which devices are used for the measurement of lengths of different orders?

The diameter of a cylinder is measured using a vernier callipers with no zero error. It is found that the zero of the vernier scale lies between $5.10 \ cm$ and $5.15 \ cm$ of the main scale. The vernier scale has $50$ divisions equivalent to $2.45 \ cm$. The $24^{\text{th}}$ division of the vernier scale exactly coincides with one of the main scale divisions. The diameter of the cylinder is: (in $cm$)

The vernier constant of Vernier callipers is $0.1 \,mm$ and it has zero error of $(-0.05) \,cm$. While measuring the diameter of a sphere,the main scale reading is $1.7 \,cm$ and the coinciding vernier division is $5$. The corrected diameter will be ........... $\times 10^{-2} \,cm$.