Given below are two statements:
Statement-$I$: The hot water flows faster than cold water.
Statement-$II$: Soap water has higher surface tension as compared to fresh water.
In the light of the above statements,choose the correct answer from the options given below:

An open cubical tank was initially fully filled with water. When the tank was accelerated on a horizontal plane along one of its sides,it was found that one-third of the volume of water spilled out. The acceleration was:

$A$ bottle of soda water is grasped by the neck and swung briskly in a vertical circle. Near which portion of the bottle do the bubbles collect?

$A$ cylindrical capillary tube of $0.2 \ mm$ radius is made by joining two capillaries $T_1$ and $T_2$ of different materials having water contact angles of $0^{\circ}$ and $60^{\circ}$,respectively. The capillary tube is dipped vertically in water in two different configurations,case $I$ and $II$ as shown in the figure. Which of the following option$(s)$ is(are) correct?
(Surface tension of water $= 0.075 \ N/m$,density of water $= 1000 \ kg/m^3$,take $g = 10 \ m/s^2$)
$(1)$ The correction in the height of the water column raised in the tube,due to the weight of water contained in the meniscus,will be different for both cases.
$(2)$ For case $I$,if the capillary joint is $5 \ cm$ above the water surface,the height of the water column raised in the tube will be more than $8.75 \ cm$. (Neglect the weight of the water in the meniscus)
$(3)$ For case $I$,if the joint is kept at $8 \ cm$ above the water surface,the height of the water column in the tube will be $7.5 \ cm$. (Neglect the weight of the water in the meniscus)
$(4)$ For case $II$,if the capillary joint is $5 \ cm$ above the water surface,the height of the water column raised in the tube will be $3.75 \ cm$. (Neglect the weight of the water in the meniscus)

$A$ horizontal fire hose with a nozzle of cross-sectional area $\frac{5}{\sqrt{21}} \times 10^{-3} \text{ m}^2$ delivers a cubic metre of water in $10 \text{ s}$. What will be the maximum possible increase in the temperature of water while it hits a rigid wall (neglecting the effect of gravity) (in $^{\circ} \text{C}$)?

Fill in the blanks using the word$(s)$ from the list appended with each statement:
$(a)$ Surface tension of liquids generally . . . with temperatures (increases / decreases)
$(b)$ Viscosity of gases . . . with temperature,whereas viscosity of liquids . . . with temperature (increases / decreases)
$(c)$ For solids with elastic modulus of rigidity,the shearing force is proportional to . . .,while for fluids it is proportional to . . . (shear strain / rate of shear strain)
$(d)$ For a fluid in a steady flow,the increase in flow speed at a constriction follows (conservation of mass / Bernoulli's principle)
$(e)$ For the model of a plane in a wind tunnel,turbulence occurs at a . . . speed for turbulence for an actual plane (greater / smaller)