In a metre bridge experiment,with a standard resistance in the right gap and a resistance coil dipped in water (in a beaker) in the left gap,the balancing length obtained is $l$. If the temperature of water is increased,the new balancing length is:

$A$ meter bridge is set up as shown to determine the end corrections at $A$ and $B$. When a resistance of $15\,\Omega$ is used in the left gap and $20\,\Omega$ in the right gap,the null point is obtained at a distance of $42\,cm$ from $A$. When these resistances are interchanged,the null point is obtained at a distance of $57\,cm$ from $A$. The values of the end corrections are:

In the circuit shown, a meter bridge is in its balanced state. The meter bridge wire has a resistance of $0.1 \, \Omega/cm$. The value of the unknown resistance $X$ and the current drawn from the battery of negligible internal resistance are:

In a meter bridge,the two gaps contain resistances of $10 \, \Omega$ and $30 \, \Omega$ respectively. If these resistances are interchanged,the null point shifts by ..... cm.

In a meter bridge,two gaps in the metallic strip are connected by $3 \Omega$ and $9 \Omega$ resistors. What should be the value of the shunt that needs to be added in parallel to the $9 \Omega$ resistor to shift the balancing point by $25 \text{ cm}$ (in $\Omega$)?

In a sensitive meter bridge apparatus,the bridge wire should possess: