In an AC circuit,the emf (e) and the current | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The instantaneous power $p$ in an $AC$ circuit is given by the product of instantaneous $emf$ and current:$p = e \cdot i = (E_{0} \sin \omega t) \

Vedclass · Accepted Answer

$\frac{E_{0} I_{0}}{2} \cos \phi$

Vedclass · Answer

(C) The instantaneous power $p$ in an $AC$ circuit is given by the product of instantaneous $emf$ and current:$p = e \cdot i = (E_{0} \sin \omega t) \cdot (I_{0} \sin (\omega t - \phi))$Using the trigonometric identity $\sin A \sin B = \frac{1}{2} [\cos(A-B) - \cos(A+B)]$,we get:$p = \frac{E_{0} I_{0}}{2} [\cos \phi - \cos(2\omega t - \phi)]$The average power $P_{av}$ over one complete cycle $T$ is the average of $p$ over time $T$:$P_{av} = \frac{1}{T} \int_{0}^{T} p \, dt = \frac{E_{0} I_{0}}{2T} \int_{0}^{T} [\cos \phi - \cos(2\omega t - \phi)] \, dt$Since the average of $\cos(2\omega t - \phi)$ over a full cycle is $0$,the expression simplifies to:$P_{av} = \frac{E_{0} I_{0}}{2} \cos \phi$Here,$\cos \phi$ is known as the power factor of the $AC$ circuit.

In an $AC$ circuit,the $emf$ $(e)$ and the current $(i)$ at any instant are given respectively by:
$e = E_{0} \sin \omega t$
$i = I_{0} \sin (\omega t - \phi)$
The average power in the circuit over one cycle of $AC$ is:

Similar Questions

An $AC$ voltage $V=20 \sin 200 \pi t$ is applied to a series $LCR$ circuit which drives a current $I=10 \sin (200 \pi t + \frac{\pi}{3})$. The average power dissipated is: (in $W$)

An inductor and a resistor of $25 \Omega$ are connected in series to an ac source of voltage $100 \sin (100 \pi t) \ V$. If the impedance of the circuit is $50 \Omega$,the average power dissipated per cycle in the circuit is: (in $W$)

In an $ac$ circuit,the current is given by $i = 5 \sin \left( 100 t - \frac{\pi}{2} \right)$ and the $ac$ potential is $V = 200 \sin (100 t) \text{ volts}$. Then the power consumption is $....... \text{ watts}$.

$A$ lamp consumes only $50 \%$ of maximum power in an $AC$ circuit. What is the phase difference between the applied voltage and the circuit current?

$(a)$ For circuits used for transporting electric power, a low power factor implies large power loss in transmission. Explain.
$(b)$ Power factor can often be improved by the use of a capacitor of appropriate capacitance in the circuit. Explain.

Vedclass Test Series

Exam Paper Generator

Online Exam Module

In an $AC$ circuit,the $emf$ $(e)$ and the current $(i)$ at any instant are given respectively by:$e = E_{0} \sin \omega t$$i = I_{0} \sin (\omega t - \phi)$The average power in the circuit over one cycle of $AC$ is: