In a series $LCR$ circuit,the plot of $I_{max}$ vs $\omega$ is shown in the figure. Find the bandwidth and mark it in the figure.

Vedclass pdf generator app on play store
Vedclass iOS app on app store
(N/A) The bandwidth of a series $LCR$ circuit is defined as the frequency range between the two half-power frequencies,$\omega_{1}$ and $\omega_{2}$,where the current amplitude drops to $\frac{1}{\sqrt{2}}$ times its maximum value.
Given $I_{max} = 1.0 \ A$,the current at half-power frequencies is $I = \frac{I_{max}}{\sqrt{2}} = \frac{1.0}{1.414} \approx 0.707 \ A$.
From the provided graph,at $I = 0.707 \ A$,the corresponding angular frequencies are $\omega_{1} = 0.8 \ rad/s$ and $\omega_{2} = 1.2 \ rad/s$.
The bandwidth $\Delta \omega$ is given by:
$\Delta \omega = \omega_{2} - \omega_{1}$
$\Delta \omega = 1.2 \ rad/s - 0.8 \ rad/s = 0.4 \ rad/s$.

Explore More

Similar Questions

Power delivered by the source of the circuit becomes maximum,when

In a series $L-C-R$ circuit,$C = 2 \mu F$,$L = 1 \ mH$,and $R = 10 \ \Omega$. What is the ratio of energies stored in the inductor and the capacitor when the maximum current flows in the circuit?

In an $L-C-R$ circuit,the power factor at resonance is

The output voltage (taken across the resistance) of an $L-C-R$ series resonant circuit falls to half its peak value at a frequency of $200 \,Hz$ and again reaches the same value at $800 \,Hz$. The bandwidth of this circuit is ............. $\,Hz$.

The $Q$-value of a series $LCR$ circuit with $L=2 \ H$,$C=32 \ \mu F$,and $R=20 \ \Omega$ is:

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo