Match the following:Column IColumn IIA. Hooke | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The correct matches are as follows:$A$. Hooke's law: Within the elastic limit, stress is directly proportional to strain. Thus, $A-3$.$B$. Shearin

Vedclass · Accepted Answer

$A-3, B-1, C-4, D-2$

Vedclass · Answer

(C) The correct matches are as follows:$A$. Hooke's law: Within the elastic limit, stress is directly proportional to strain. Thus, $A-3$.$B$. Shearing strain: It is defined as the angle in radians through which a plane perpendicular to the fixed surface of a cubical body gets turned under the effect of a tangential force. It is also known as tangential strain. Thus, $B-1$.$C$. Bulk strain: For a solid, the bulk strain (volumetric strain) is equal to $3$ times the linear strain. Thus, $C-4$.$D$. Elastic fatigue: The temporary loss of elastic properties due to the action of repeated alternating deforming forces is called elastic fatigue. Thus, $D-2$.Therefore, the correct matching is $A-3, B-1, C-4, D-2$, which corresponds to option $C$.

Column $I$	Column $II$
$A$. Hooke's law	$1$. Tangential strain
$B$. Shearing strain	$2$. Temporary loss of elastic property
$C$. Bulk strain	$3$. Elastic limit
$D$. Elastic fatigue	$4$. $3$ times the linear strain

Match the following:
Column $I$ Column $II$
$A$. Hooke's law $1$. Tangential strain
$B$. Shearing strain $2$. Temporary loss of elastic property
$C$. Bulk strain $3$. Elastic limit
$D$. Elastic fatigue $4$. $3$ times the linear strain

Similar Questions

$A$ solid that transmits light in the visible region and has a very low melting point possesses:

$A$ body of mass $10 \ kg$ is attached to a wire of $0.3 \ m$ length. The breaking stress is $4.8 \times 10^7 \ N \ m^{-2}$. The area of cross-section of the wire is $10^{-6} \ m^2$. The maximum angular velocity with which it can be rotated in a horizontal circle is

$A$ bob of mass $10\, kg$ is attached to a wire $0.3\, m$ long. Its breaking stress is $4.8 \times 10^7\, N/m^2$. The area of cross-section of the wire is $10^{-6}\, m^2$. The maximum angular velocity with which it can be rotated in a horizontal circle is ....... $rad/sec$.

If the breaking stress of a wire is $3.18 \times 10^{10} \, N/m^2$,what should be its minimum radius so that the wire does not break? (Refer to the figure for the masses attached to the pulley system,assume $g = 10 \, m/s^2$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module

Match the following:Column $I$Column $II$$A$. Hooke's law$1$. Tangential strain$B$. Shearing strain$2$. Temporary loss of elastic property$C$. Bulk strain$3$. Elastic limit$D$. Elastic fatigue$4$. $3$ times the linear strain