One mole of a monatomic ideal gas is taken through a cycle $ABCDA$ as shown in the $P-V$ diagram. Column $II$ gives the characteristics involved in the cycle. Match them with each of the processes given in Column $I$.
Column $I$ Column $II$
$(A)$ Process $A \rightarrow B$ $(p)$ Internal energy decreases.
$(B)$ Process $B \rightarrow C$ $(q)$ Internal energy increases.
$(C)$ Process $C \rightarrow D$ $(r)$ Heat is lost.
$(D)$ Process $D \rightarrow A$ $(s)$ Heat is gained.
$(t)$ Work is done on the gas.

  • A
    $(A) \rightarrow p, q, r \text{ and } s, (B) \rightarrow q, (C) \rightarrow p, q, r \text{ and } s, (D) \rightarrow p, q, r \text{ and } s$
  • B
    $(A) \rightarrow p, r, \text{ and } t, (B) \rightarrow p \text{ and } r, (C) \rightarrow q, \text{ and } s, (D) \rightarrow r \text{ and } t$
  • C
    $(A) \rightarrow p, q, \text{ and } t, (B) \rightarrow s \text{ and } q, (C) \rightarrow q, \text{ and } t, (D) \rightarrow s \text{ and } r$
  • D
    $(A) \rightarrow q, r, \text{ and } t, (B) \rightarrow r \text{ and } t, (C) \rightarrow r, \text{ and } s, (D) \rightarrow p \text{ and } q$

Explore More

Similar Questions

Two cylinders $A$ and $B$ fitted with pistons contain an equal amount of an ideal diatomic gas at temperature $T$ $K$. The piston of cylinder $A$ is free to move,while that of $B$ is held fixed. The same amount of heat is given to the gas in each cylinder. If the rise in temperature of the gas in $A$ is $dT_{A}$,then the rise in temperature of the gas in cylinder $B$ is (where $\gamma = \frac{C_{P}}{C_{V}}$):

$A$ heat engine is involved with an exchange of heat of $1915\, J,$ $-40\, J,$ $+125\, J,$ and $-Q\, J$ during one cycle,achieving an efficiency of $50.0 \%$. The value of $Q$ is ....... $J$.

Three processes form a thermodynamic cycle as shown on the $P-V$ diagram for an ideal gas. Process $1 \rightarrow 2$ takes place at a constant temperature $(300 \ K)$. Process $2 \rightarrow 3$ takes place at a constant volume. During this process,$40 \ J$ of heat leaves the system. Process $3 \rightarrow 1$ is adiabatic and the temperature $T_3$ is $275 \ K$. The work done by the gas during the process $3 \rightarrow 1$ is ..... $J$.

$A$ thermodynamic system is taken from an initial state $i$ with internal energy $U_i = 100 \ J$ to the final state $f$ along two different paths $iaf$ and $ibf$,as schematically shown in the figure. The work done by the system along the paths $ia$,$af$,$ib$ and $bf$ are $W_{ia} = 50 \ J$,$W_{af} = 200 \ J$,$W_{ib} = 50 \ J$ and $W_{bf} = 100 \ J$ respectively. The heat supplied to the system along the paths $iaf$ and $ibf$ are $Q_{iaf}$ and $Q_{ibf}$ respectively. If the internal energy of the system in the state $b$ is $U_b = 200 \ J$ and $Q_{iaf} = 500 \ J$,the ratio $Q_{ibf} / Q_{iaf}$ is:

Neon gas of a given mass expands isothermally to double its volume. What should be the further fractional decrease in pressure,so that the gas when adiabatically compressed from that state,reaches the original state?

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo