One mole of an ideal monoatomic gas is taken | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The path $BC$ is a straight line passing through points $(V_0, 3P_0)$ and $(2V_0, P_0)$.The slope of the line $BC$ is $m = \frac{P_0 - 3P_0}{2V_0

Vedclass · Accepted Answer

$\frac{25}{8} \frac{P_0 V_0}{R}$

Vedclass · Answer

(A) The path $BC$ is a straight line passing through points $(V_0, 3P_0)$ and $(2V_0, P_0)$.The slope of the line $BC$ is $m = \frac{P_0 - 3P_0}{2V_0 - V_0} = \frac{-2P_0}{V_0}$.The equation of the line $BC$ is $P - 3P_0 = \frac{-2P_0}{V_0}(V - V_0)$,which simplifies to $P = 3P_0 - \frac{2P_0}{V_0}(V - V_0) = P_0(5 - \frac{2V}{V_0})$.Using the ideal gas law $PV = nRT$ with $n = 1$,we have $T = \frac{PV}{R} = \frac{P_0}{R}(5V - \frac{2V^2}{V_0})$.To find the maximum temperature,we set $\frac{dT}{dV} = 0$:$\frac{dT}{dV} = \frac{P_0}{R}(5 - \frac{4V}{V_0}) = 0 \implies V = \frac{5}{4}V_0$.Substituting $V = \frac{5}{4}V_0$ back into the expression for $T$:$T_{max} = \frac{P_0}{R}(5(\frac{5}{4}V_0) - \frac{2}{V_0}(\frac{25}{16}V_0^2)) = \frac{P_0}{R}(\frac{25}{4}V_0 - \frac{25}{8}V_0) = \frac{25}{8} \frac{P_0 V_0}{R}$.

One mole of an ideal monoatomic gas is taken along the path $ABCA$ as shown in the $PV$ diagram. The maximum temperature attained by the gas along the path $BC$ is given by

Similar Questions

Six moles of an ideal gas perform the cycle shown in the figure. If the temperatures are $T_A = 600 \, K$, $T_B = 800 \, K$, $T_C = 2200 \, K$, and $T_D = 1200 \, K$, the work done per cycle is ........ $kJ$.

The following figure shows a $P-T$ graph for four processes $A, B, C$ and $D$. Select the correct alternative.

$A$ system goes from $A$ to $B$ via two processes $I$ and $II$ as shown in the figure. If $\Delta U_I$ and $\Delta U_{II}$ are the changes in internal energies in the processes $I$ and $II$ respectively,then:

$A$ gas is taken through a cyclic process $ABCA$ as shown in the figure. If $2.4 \, cal$ of heat is given in the process,what is the value of $J$ in $J/cal$ (mechanical equivalent of heat)?

The $P-V$ diagram shows a cyclic process for a thermodynamic engine containing a monoatomic ideal gas. The energy absorbed from the heat source during one complete cycle is .......

Vedclass Test Series

Exam Paper Generator

Online Exam Module