The breaking stress of aluminium is $7.5 \times 10^7 \,N m^{-2}$. The greatest length of aluminium wire that can hang vertically without breaking is ......... $\times 10^3 \,m$ (Density of aluminium is $2.7 \times 10^3 \,kg m^{-3}$ and $g = 9.8 \,m s^{-2}$)

The elastic limit of a metal is $\frac{400}{\pi} \text{ MPa}$. If a rod of this metal is to support a $484 \text{ N}$ load without exceeding its elastic limit, the minimum diameter of the rod is: (in $\text{ mm}$)

Two wires as shown in the figure below, made of steel, have a breaking stress of $12 \times 10^8 \text{ N/m}^2$. The area of cross-section of the upper wire is $0.008 \text{ cm}^2$ and that of the lower wire is $0.004 \text{ cm}^2$. The maximum mass that can be added to the pan without breaking any wire is . . . . . . kg. (Take $g = 10 \text{ m/s}^2$)

Is stress a vector,scalar,or tensor?

Two wires $A$ and $B$ are stretched by the same load. If the area of cross-section of wire $A$ is double that of wire $B$,then the stress on wire $B$ is

What is a perfectly elastic body and a perfectly plastic body?