The energy needed for breaking a liquid drop | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The volume of the large drop is equal to the sum of the volumes of the $n$ small droplets: $\frac{4}{3} \pi R^3 = n \cdot \frac{4}{3} \pi r^3$,whi

Vedclass · Accepted Answer

$4 \pi T R^2 \left[\frac{R}{r} - 1\right]$

Vedclass · Answer

(A) The volume of the large drop is equal to the sum of the volumes of the $n$ small droplets: $\frac{4}{3} \pi R^3 = n \cdot \frac{4}{3} \pi r^3$,which implies $R^3 = n r^3$ or $n = \frac{R^3}{r^3}$.The initial surface area of the large drop is $A_i = 4 \pi R^2$.The final surface area of the $n$ small droplets is $A_f = n \cdot 4 \pi r^2$.The change in surface area is $\Delta A = A_f - A_i = n(4 \pi r^2) - 4 \pi R^2$.Substituting $n = \frac{R^3}{r^3}$,we get $\Delta A = \left(\frac{R^3}{r^3}\right) 4 \pi r^2 - 4 \pi R^2 = 4 \pi R^3 \left(\frac{1}{r}\right) - 4 \pi R^2 = 4 \pi R^2 \left(\frac{R}{r} - 1\right)$.The energy required is $W = T \cdot \Delta A = 4 \pi T R^2 \left(\frac{R}{r} - 1\right)$.

The energy needed for breaking a liquid drop of radius $R$ into $n$ droplets each of radius $r$ is (where $T$ is the surface tension of the liquid).

Similar Questions

If two soap bubbles of equal radii $r$ coalesce,then the radius of curvature of the interface between the two bubbles will be:

An air bubble doubles in radius when it rises from the bottom of the sea to the surface. If the atmospheric pressure is equal to the pressure exerted by a $10 \, m$ column of water,then the depth of the sea is $... \, m$. (Assume surface tension is negligible.)

Two spherical soap bubbles of radii $r_1$ and $r_2$ in vacuum combine under isothermal conditions. The resulting bubble has a radius equal to:

$A$ vessel having a small hole in the bottom must hold water without leakage when water is poured to a height of $7 \text{ cm}$. What is the radius of the hole (in $\text{ mm}$)? [Surface tension of water is $0.07 \text{ N/m}$, angle of contact is $0^{\circ}$, and $g = 10 \text{ m/s}^2$]

The excess pressure inside a spherical soap bubble of radius $1 \,cm$ is balanced by a column of oil (specific gravity $= 0.8$), $2 \,mm$ high. The surface tension of the bubble is: (in $\,N/m$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module