The length of a cylinder is measured with the help of vernier callipers whose nine divisions of the main scale are equal to ten divisions of the vernier scale. The smallest division on the main scale is $0.5 \ mm$. It is observed that the zero of the vernier scale has just crossed the $78^{th}$ division of the main scale,and the fourth division of the vernier scale coincides with a main scale division. The length of the cylinder is $..... \ mm$.

The least count of a vernier caliper is $\frac{1}{20N} \text{ cm}$. The value of one division on the main scale is $1 \text{ mm}$. Then the number of divisions of the main scale that coincide with $N$ divisions of the vernier scale is:

$A$ vernier callipers used by a student has $20$ divisions in $1\;cm$ on the main scale. $10$ vernier divisions coincide with $9$ main scale divisions. When the jaws are closed,the zero of the main scale is to the left of the zero of the vernier scale,and the $6^{th}$ division of the vernier scale coincides with a main scale division. The student places a wooden cylinder between the jaws to measure its length. The zero of the vernier scale is to the right of the $3.20\;cm$ mark,and the $8^{th}$ vernier division coincides with a main scale division. When measuring the thickness (diameter) of the cylinder,the zero of the vernier scale lies to the right of the $1.50\;cm$ mark,and the $6^{th}$ vernier division coincides with a main scale division. The correct values of the measured length and diameter are respectively:

$A$ student measured the length of a rod and wrote it as $3.50\;cm$. Which instrument did he use to measure it?

The one division of main scale of vernier callipers reads $1\,mm$ and $10$ divisions of Vernier scale is equal to the $9$ divisions on main scale. When the two jaws of the instrument touch each other the $zero$ of the Vernier lies to the right of $zero$ of the main scale and its fourth division coincides with a main scale division. When a spherical bob is tightly placed between the two jaws,the $zero$ of the Vernier scale lies in between $4.1\,cm$ and $4.2\,cm$ and $6^{\text{th}}$ Vernier division coincides with a main scale division. The diameter of the bob will be $.............10^{-2}\,cm$

The figure below shows a particular position of the Vernier calipers on a centimetre scale. In this position,the value of $x$ shown in the figure is .......... $cm$ (figure is not to scale).