The ratio $(R)$ of output resistance $r_0$ and input resistance $r_i$ in measurements of input and output characteristics of a transistor is typically in the range:

An unknown transistor needs to be identified as a $npn$ or $pnp$ type. $A$ multimeter,with $+ve$ and $-ve$ terminals,is used to measure resistance between different terminals of the transistor. If terminal $2$ is the base of the transistor,then which of the following is correct for a $pnp$ transistor?

In a common emitter amplifier,the input resistance is $1000 \Omega$,the peak value of the input signal voltage is $5 mV$,and $\beta = 60$. The peak value of the output current is:

Input signal to a common emitter amplifier having a voltage gain of $1000$ is given by $v_i = (0.004 \, V) \sin(\omega t + \pi/2)$. The corresponding output signal is

To use a transistor as an amplifier,

In a $NPN$ transistor,$10^8$ electrons enter the emitter in $10^{-8} \ s$. If $1\%$ of electrons are lost in the base,the fraction of current that enters the collector and the current amplification factor $\beta$ are respectively: