There is a uniform magnetic field $B$ normal to the $xy$ plane. $A$ conductor $ABC$ has length $AB = l_1$,parallel to the $x$-axis,and length $BC = l_2$,parallel to the $y$-axis. $ABC$ moves in the $xy$ plane with velocity $\vec{v} = v_x \hat{i} + v_y \hat{j}$. The potential difference between $A$ and $C$ is proportional to

$A$ coil of cross-sectional area $A$ having $n$ turns is placed in a uniform magnetic field $B.$ When it is rotated with an angular velocity $\omega,$ the maximum $e.m.f.$ induced in the coil will be

$A$ conducting circular loop is placed in a uniform magnetic field,$B = 0.025 \, T$,with its plane perpendicular to the field. The radius of the loop is made to shrink at a constant rate of $1 \, mm \, s^{-1}$. The induced $emf$ when the radius is $2 \, cm$ is:

$A$ conducting rod is moving in a uniform magnetic field as shown in the diagram. Which end is at a lower potential?

$A$ metal rod of length $1\,m$ is rotated about one of its ends in a plane at right angles to a magnetic field of induction $2.5 \times 10^{-3}\,Wb/m^2$. If it makes $1800\,rpm$,calculate the induced e.m.f. between its ends in $V$.

$A$ long straight wire carries a current,$I = 2 \text{ A}$. $A$ semi-circular conducting rod is placed beside it on two conducting parallel rails of negligible resistance. Both the rails are parallel to the wire. The wire,the rod,and the rails lie in the same horizontal plane,as shown in the figure. Two ends of the semi-circular rod are at distances $1 \text{ cm}$ and $4 \text{ cm}$ from the wire. At time $t = 0$,the rod starts moving on the rails with a speed $v = 3.0 \text{ m/s}$. $A$ resistor $R = 1.4 \text{ } \Omega$ and a capacitor $C_0 = 5.0 \text{ } \mu\text{F}$ are connected in series between the rails. At time $t = 0$,$C_0$ is uncharged. Which of the following statement$(s)$ is(are) correct? $\left[\mu_0 = 4\pi \times 10^{-7} \text{ SI units}, \ln 2 = 0.7\right]$
$(A)$ Maximum current through $R$ is $1.2 \times 10^{-6} \text{ A}$
$(B)$ Maximum current through $R$ is $3.8 \times 10^{-6} \text{ A}$
$(C)$ Maximum charge on capacitor $C_0$ is $8.4 \times 10^{-12} \text{ C}$
$(D)$ Maximum charge on capacitor $C_0$ is $2.4 \times 10^{-12} \text{ C}$