Two rods of same material have same length and area. The heat $\Delta Q$ flows through them for $12 \, \text{minutes}$ when they are joined in series. If now both the rods are joined in parallel,then the same amount of heat $\Delta Q$ will flow in ........ $\text{minutes}$.

$A$ cylinder of radius $R$ made of a material of thermal conductivity $k_1$ is surrounded by a cylindrical shell of inner radius $R$ and outer radius $2R$ made of a material of thermal conductivity $k_2$. The two ends of the combined system are maintained at different temperatures. There is no loss of heat from the cylindrical surface and the system is in steady state. The effective thermal conductivity of the system is

$A$ composite block is made of slabs $A, B, C, D$ and $E$ of different thermal conductivities (given in terms of a constant $K$) and sizes (given in terms of length,$L$) as shown in the figure. All slabs are of same width. Heat $Q$ flows only from left to right through the blocks. Then in steady state:
$(A)$ Heat flow through $A$ and $E$ slabs are same.
$(B)$ Heat flow through slab $E$ is maximum.
$(C)$ Temperature difference across slab $E$ is smallest.
$(D)$ Heat flow through $C =$ Heat flow through $B +$ Heat flow through $D$.

Two plates of equal area are placed in contact with each other. Their thicknesses are $2.0 \, cm$ and $5.0 \, cm$. The temperature of the outer surface of the first plate is $-20^{\circ}C$ and the temperature of the outer surface of the second plate is $20^{\circ}C$. If the plates are made of the same material,find the temperature of the contact surface in $^{\circ}C$.

$A$ metallic prong consists of $4$ rods made of the same material,with the same cross-sections and the same lengths as shown below. The three forked ends are kept at $100^{\circ} C$ and the handle end is at $0^{\circ} C$. The temperature of the junction is ............. $^{\circ} C$.

For the shown figure,calculate the equivalent thermal resistance if the bricks are made of the same material of thermal conductivity $K$.