What amount of heat will be generated in a co | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) Let the initial current be $I_0$. Since the current decreases uniformly to zero in time $\Delta t$,the current at any time $t$ is given by $I(t) =

Vedclass · Accepted Answer

$\frac{4}{3}\frac{q^2 R}{\Delta t}$

Vedclass · Answer

(A) Let the initial current be $I_0$. Since the current decreases uniformly to zero in time $\Delta t$,the current at any time $t$ is given by $I(t) = I_0(1 - \frac{t}{\Delta t})$.The total charge $q$ passed is the integral of current over time: $q = \int_0^{\Delta t} I(t) dt = \int_0^{\Delta t} I_0(1 - \frac{t}{\Delta t}) dt = I_0 [t - \frac{t^2}{2\Delta t}]_0^{\Delta t} = I_0(\Delta t - \frac{\Delta t}{2}) = \frac{I_0 \Delta t}{2}$.Thus,$I_0 = \frac{2q}{\Delta t}$.The heat generated $H$ is given by $H = \int_0^{\Delta t} I^2 R dt = R \int_0^{\Delta t} I_0^2 (1 - \frac{t}{\Delta t})^2 dt$.Let $u = 1 - \frac{t}{\Delta t}$,then $du = -\frac{dt}{\Delta t}$,so $dt = -\Delta t du$.When $t=0, u=1$; when $t=\Delta t, u=0$.$H = R I_0^2 \int_1^0 u^2 (-\Delta t du) = R I_0^2 \Delta t \int_0^1 u^2 du = R I_0^2 \Delta t [\frac{u^3}{3}]_0^1 = \frac{R I_0^2 \Delta t}{3}$.Substituting $I_0 = \frac{2q}{\Delta t}$,we get $H = \frac{R}{3} (\frac{2q}{\Delta t})^2 \Delta t = \frac{R}{3} \frac{4q^2}{\Delta t^2} \Delta t = \frac{4q^2 R}{3 \Delta t}$.

What amount of heat will be generated in a coil of resistance $R$ due to a charge $q$ passing through it if the current in the coil decreases to zero uniformly during a time interval $\Delta t$?

Similar Questions

The power wasted in the connecting wires of voltage $V$ and finite resistance $R_C$ from the power station to the device of power $P$ is . . . . . . .

An electric bulb is marked $100\ W, 230\ V$. If the supply voltage drops to $115\ V$,how much heat (in $J$) is produced by the bulb in $20\ min$?

When a current flows through a wire of resistance $R$ under a constant potential difference,the heat produced by the current is inversely proportional to:

If the power in the external resistance $R$ is maximum,then which of the following statements are correct?
$(i) R = r$
$(ii)$ Power in $R$ is $\frac{E^2}{4R}$
$(iii)$ Input power is $\frac{E^2}{2R}$
$(iv)$ Efficiency is $50\%$

If the resistance of the filament increases with temperature,what will be the power dissipated in a $220\, V- 100\, W$ lamp when connected to a $110\, V$ power supply?

Vedclass Test Series

Exam Paper Generator

Online Exam Module