When the temperature of a rod increases from | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The moment of inertia of a rod about an axis passing through its center and perpendicular to its length is given by:$I = \frac{1}{12} ML^2$  --- $

Vedclass · Accepted Answer

$2\alpha \Delta t$

Vedclass · Answer

(A) The moment of inertia of a rod about an axis passing through its center and perpendicular to its length is given by:$I = \frac{1}{12} ML^2$  --- $(i)$where $M$ is the mass and $L$ is the length of the rod.Since the mass $M$ remains constant during thermal expansion,we differentiate the expression with respect to $L$:$\Delta I = \frac{1}{12} M (2L \Delta L) = 2 (\frac{1}{12} ML^2) \frac{\Delta L}{L} = 2I \frac{\Delta L}{L}$  --- $(ii)$Dividing equation $(ii)$ by equation $(i)$,we get:$\frac{\Delta I}{I} = 2 \frac{\Delta L}{L}$  --- $(iii)$We know that the change in length due to thermal expansion is given by $\Delta L = L \alpha \Delta t$,which implies:$\frac{\Delta L}{L} = \alpha \Delta t$Substituting this into equation $(iii)$,we get:$\frac{\Delta I}{I} = 2 \alpha \Delta t$

When the temperature of a rod increases from $t$ to $(t + \Delta t)$,its moment of inertia increases from $I$ to $(I + \Delta I)$. If $\alpha$ is the coefficient of linear expansion of the rod,then the value of $(\frac{\Delta I}{I})$ is

Similar Questions

What will happen if a rod is tied with fixed supports rigidly at both ends and its temperature is increased?

$A$ hole of diameter $5 \ cm$ is drilled in a metal sheet at $30^{\circ} C$. The coefficient of linear expansion of the metal is $2 \times 10^{-5} K^{-1}$. The diameter of the hole when the temperature is raised to $230^{\circ} C$ is equal to: (in $cm$)

If two rods of lengths $L$ and $2L$,having coefficients of linear expansion $\alpha$ and $2\alpha$ respectively are connected end-to-end,then find the average coefficient of linear expansion of the composite rod.

When the temperature of a metal wire is increased from $0^{\circ} \,C$ to $10^{\circ} \,C$,its length increases by $0.02 \%$. The percentage change in its mass density will be closest to: (in $\%$)

$A$ brass disc fits snugly in a hole of a steel plate. The disc can be loosened from the hole if the system:

Vedclass Test Series

Exam Paper Generator

Online Exam Module