Which of the following cylindrical rods will conduct the most heat when their ends are maintained at the same steady temperature difference?

The thickness of a metallic plate is $0.4 \ cm$. The temperature difference between its two surfaces is $20^{\circ}C$. The quantity of heat flowing per second is $50 \ \text{calories}$ through an area of $5 \ cm^2$. In the $CGS$ system,the coefficient of thermal conductivity is:

Two identical containers are filled with the same amount of ice. The containers are made of different metals. If the ice in both containers melts in $20$ minutes and $35$ minutes respectively,find the ratio of their thermal conductivities.

Two concentric spheres of radii $r_1$ and $r_2$ are maintained at temperatures $T_1$ and $T_2$ respectively. The rate of radial heat flow between the two concentric spheres is proportional to:

$A$ cylindrical steel rod of length $0.10 \,m$ and thermal conductivity $50 \,Wm^{-1}K^{-1}$ is welded end to end to a copper rod of thermal conductivity $400 \,Wm^{-1}K^{-1}$ and of the same area of cross-section but $0.20 \,m$ long. The free end of the steel rod is maintained at $100^{\circ}C$ and that of the copper rod at $0^{\circ}C$. Assuming that the rods are perfectly insulated from the surroundings,the temperature at the junction of the two rods is ................... $^{\circ}C$.

What is the temperature (in $^oC$) of the steel-copper junction in the steady state of the system shown in the figure? Length of the steel rod $= 15.0 \; cm,$ length of the copper rod $= 10.0 \; cm,$ temperature of the furnace $= 300^{\circ} C,$ temperature of the other end $= 0^{\circ} C.$ The area of cross-section of the steel rod is twice that of the copper rod. (Thermal conductivity of steel $= 50.2 \; J s^{-1} m^{-1} K^{-1};$ and of copper $= 385 \; J s^{-1} m^{-1} K^{-1}$)