Young's modulus of rubber is $10^4 \ N/m^2$ and the area of cross-section is $2 \ cm^2$. If a force of $2 \times 10^5 \ dynes$ is applied along its length,then its initial length $L$ becomes:

The ratio of the lengths of two wires of the same material is $1:2$ and the ratio of their radii is $1:\sqrt{2}$. If they are stretched by the same force,what is the ratio of the increase in their lengths?

The mass and length of a wire are $M$ and $L$ respectively. The density of the material of the wire is $d$. On applying a force $F$ on the wire,the increase in length is $l$. Then,the Young's modulus of the material of the wire will be:

$A$ steel rod of radius $20 \ mm$ and length $2 \ m$ is acted upon by a force of $400 \ kN$ along its length. The values of stress and strain are respectively $(Y_{\text{steel}} = 2 \times 10^{11} \ N \ m^{-2})$.

$A$ horizontal steel railroad track has a length of $100 \, m$ when the temperature is $25^{\circ} C$. The track is constrained from expanding or bending. The stress on the track on a hot summer day,when the temperature is $40^{\circ} C$,is ............. $\times 10^7 \, Pa$. (Note: The linear coefficient of thermal expansion for steel is $1.1 \times 10^{-5} /^{\circ} C$ and the Young's modulus of steel is $2 \times 10^{11} \, Pa$.)

The speed of a transverse wave passing through a string of length $50 \; cm$ and mass $10 \; g$ is $60 \; ms^{-1}$. The area of cross-section of the wire is $2.0 \; mm^2$ and its Young's modulus is $1.2 \times 10^{11} \; Nm^{-2}$. The extension of the wire over its natural length due to its tension will be $x \times 10^{-5} \; m$. The value of $x$ is $...$