Match the instruments in Column-$I$ with their respective least counts in Column-$II$.

Column-$I$	Column-$II$
$(1)$ Traveling Microscope	$(a)$ $0.01\,cm$
$(2)$ Screw Gauge	$(b)$ $0.001\,cm$
	$(c)$ $0.0001\,cm$

Which devices are used for the measurement of lengths of different orders?

$A$ screw gauge has a least count of $0.01\, mm$ and there are $50$ divisions on its circular scale. The pitch of the screw gauge is $........\, mm$.

$A$ screw gauge with a pitch of $0.5 \ mm$ and a circular scale with $50$ divisions is used to measure the thickness of a thin sheet of Aluminium. Before starting the measurement,it is found that when the two jaws of the screw gauge are brought in contact,the $45^{th}$ division coincides with the main scale line and the zero of the main scale is barely visible. What is the thickness of the sheet (in $mm$) if the main scale reading is $0.5 \ mm$ and the $25^{th}$ division coincides with the main scale line?

If $50$ Vernier divisions are equal to $49$ main scale divisions of a travelling microscope and one smallest reading of main scale is $0.5 \,mm$, the Vernier constant of travelling microscope is:

If the screw on a screw gauge is given six rotations,it moves by $3\; mm$ on the main scale. If there are $50$ divisions on the circular scale,the least count of the screw gauge is: