$A$ block of mass $25 \ kg$ is pulled along a horizontal surface by a force at an angle $45^{\circ}$ with the horizontal. The friction coefficient between the block and the surface is $0.25$. The block travels at a uniform velocity. The work done by the applied force during a displacement of $5 \ m$ of the block is (in $J$)

$A$ car of mass $1250 \ kg$ is moving with a velocity of $30 \ m/s$. $A$ resistive force of $750 \ N$ acts on it. If the engine produces a power of $30 \ kW$,what is the acceleration of the car in $m/s^2$?

What force should be applied on the wedge so that the block over it does not move? (All surfaces are smooth)

$A$ bullet of mass $0.1\, kg$ is fired into a wooden block to pierce through it,but it stops after moving a distance of $50\, cm$ into it. If the velocity of the bullet before hitting the wood is $10\, m/s$ and it slows down with uniform deceleration,then the magnitude of the effective retarding force on the bullet is $'x'\, N$. The value of $'x'$ to the nearest integer is:

At time $t=0$, a force $F=\alpha t$, where $t$ is time in seconds, is applied to a body of mass $1 \text{ kg}$, resting on a smooth horizontal plane. If the direction of the force makes an angle of $45^{\circ}$ with the horizontal, then the velocity of the body at the moment of its breaking off the plane is

$A$ helicopter of mass $1000 \;kg$ rises with a vertical acceleration of $15\; m s^{-2}$. The crew and the passengers weigh $300\; kg$. Give the magnitude and direction of the
$(a)$ force on the floor by the crew and passengers,
$(b)$ action of the rotor of the helicopter on the surrounding air,
$(c)$ force on the helicopter due to the surrounding air.