$A$ cell in the secondary circuit gives a null deflection for $2.5 \,m$ length of a potentiometer wire having a total length of $10 \,m$. If the length of the potentiometer wire is increased by $1 \,m$ without changing the cell in the primary circuit, the new position of the null point is: (in $m$)

$A$ $10 \,m$ long potentiometer wire is connected to a battery having a steady voltage. $A$ Leclanche cell is balanced at $4 \,m$ length of the wire. If the length is kept the same,but its cross-section is doubled,the null point will be obtained at ........... $m$.

$A$ potentiometer is an accurate and versatile device to make electrical measurements of $EMF$ because the method involves:

The given potentiometer has its wire of resistance $10\, \Omega$. When the sliding contact is in the middle of the potentiometer wire,the potential drop across the $2\, \Omega$ resistor is -

$A$ potentiometer wire of length $L$ and a resistance $r$ are connected in series with a battery of e.m.f. $E_0$ and a resistance $r_1$. An unknown e.m.f. $E$ is balanced at a length $l$ of the potentiometer wire. The e.m.f. $E$ will be given by

$A$ potentiometer wire $PQ$ of $1\,m$ length is connected to a standard cell $E_{1}$. Another cell $E_{2}$ of emf $1.02\,V$ is connected with a resistance $r$ and switch $S$ (as shown in figure). With switch $S$ open,the null position is obtained at a distance of $49\,cm$ from $Q$. The potential gradient in the potentiometer wire is.......$V/cm$.