$A$ window used to thermally insulate a room from outside consists of two parallel glass sheets each of area $2.6 \,m^2$ and thickness $1 \,cm$ separated by $5 \,cm$ thick stagnant air. In the steady state, the room-glass interface is at $18^{\circ} C$ and the glass-outdoor interface is at $-2^{\circ} C$. If the thermal conductivities of glass and air are respectively $0.8 \,Wm^{-1} K^{-1}$ and $0.08 \,Wm^{-1} K^{-1}$, the rate of flow of heat through the window is (in $\,W$)

An insulated container is filled with ice at $0\,^{\circ}\text{C}$,and another container is filled with water that is continuously boiling at $100\,^{\circ}\text{C}$. In a series of experiments,the containers are connected by various thick metal rods that pass through the walls of the container as shown in the figure.
In experiment $I$: a copper rod is used and all ice melts in $20$ minutes.
In experiment $II$: a steel rod of identical dimensions is used and all ice melts in $80$ minutes.
In experiment $III$: both the rods are used in series and all ice melts in $t_{10}$ minutes.
In experiment $IV$: both rods are used in parallel and all ice melts in $t_{20}$ minutes.

$A$ copper rod of length $18 \ cm$ and a steel rod of length $6 \ cm$ are joined together to form a composite rod of uniform cross-section. The temperature of the free end of the copper rod is $100 \ ^\circ C$ and the temperature of the free end of the steel rod is $0 \ ^\circ C$. What is the temperature at the junction in $^\circ C$? (Thermal conductivity of copper is $9$ times that of steel. The rod is in a steady state.)

Three rods of identical dimensions are connected as shown in the figure. Points $P$ and $Q$ are maintained at different temperatures. If the rate of heat flow through $PRQ$ and $PQ$ is the same,then...

Two rods of same material have same length and area. The heat $\Delta Q$ flows through them for $12 \, \text{minutes}$ when they are joined in series. If now both the rods are joined in parallel,then the same amount of heat $\Delta Q$ will flow in ........ $\text{minutes}$.

Six identical conducting rods are joined as shown. The ends $A$ and $D$ are maintained at $200\,^{\circ}C$ and $20\,^{\circ}C$ respectively. No heat is lost to the surroundings. The temperature of the junction $C$ will be ........ $^{\circ}C$.