A metal string A is suspended from a rigid su | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The elongation $\Delta L$ in a string is given by the formula $\Delta L = \frac{FL}{AY}$, where $F$ is the tension, $L$ is the length, $A$ is the

Vedclass · Accepted Answer

$6$

Vedclass · Answer

(D) The elongation $\Delta L$ in a string is given by the formula $\Delta L = \frac{FL}{AY}$, where $F$ is the tension, $L$ is the length, $A$ is the cross-sectional area, and $Y$ is the Young's modulus.For string $A$, the total mass supported is $M + 2M = 3M$, so the tension $F_A = 3Mg$.For string $B$, the mass supported is $2M$, so the tension $F_B = 2Mg$.Given: $A_A = A_B = A$, $L_A/L_B = 2$, and $Y_A/Y_B = 0.5$.The elongation in $A$ is $\Delta L_A = \frac{F_A L_A}{A Y_A} = \frac{3Mg L_A}{A Y_A}$.The elongation in $B$ is $\Delta L_B = \frac{F_B L_B}{A Y_B} = \frac{2Mg L_B}{A Y_B}$.The ratio of elongations is $\frac{\Delta L_A}{\Delta L_B} = \left( \frac{3Mg}{2Mg} \right) \cdot \left( \frac{L_A}{L_B} \right) \cdot \left( \frac{Y_B}{Y_A} \right)$.Substituting the values: $\frac{\Delta L_A}{\Delta L_B} = \left( \frac{3}{2} \right) \cdot (2) \cdot \left( \frac{1}{0.5} \right) = 3 \cdot 2 = 6$.

Similar Questions

$A$ cable is cut to half of its original length. What will be the effect on the increase in its length under a given load?

The force required to stretch a steel wire of area of cross-section $1 \,mm^2$ to double its length is (Young's modulus of steel $= 2 \times 10^{11} \,N \,m^{-2}$)

If the given graph shows the load $(W)$ attached to and the elongation $(\Delta l)$ produced in a wire of length $1 \,m$ and area of cross-section $1 \,mm^2$, then the Young's modulus of the material of the wire is

$A$ load $W$ produces an extension of $1 \ mm$ in a thread of radius $r$. If the load is increased to $4W$ and the radius is increased to $2r$,while all other factors remain the same,what will be the new extension in $mm$?

$A$ thick brass wire of length $L$ and density $\rho$ is suspended from a rigid support. Due to its own weight,$\ell$ is the increase in length. The Young's modulus $Y$ of the brass wire in terms of density is $(g = \text{acceleration due to gravity})$

Vedclass Test Series

Exam Paper Generator

Online Exam Module