Two $U$-shaped tubes are moving inside each other as shown in the figure. If the length of each tube is $l$ and they move with velocity $v$ in a magnetic field $B$,what is the induced $emf$ in the circuit?

$A$ copper rod $AB$ of length $l$ is rotated about end $A$ with a constant angular velocity $\omega$. The electric field at a distance $x$ from the axis of rotation is

The figure shows a square loop $L$ of side $5\, cm$ which is connected to a network of resistances. The whole setup is moving towards the right with a constant speed of $1\, cm/s$. At some instant,a part of $L$ is in a uniform magnetic field of $1\, T$,perpendicular to the plane of the loop. If the resistance of $L$ is $1.7\, \Omega$,the current in the loop at that instant will be close to.....$\mu A$.

$A$ circular wheel with $10$ spokes, with its plane vertical along East-West, is rotating about its natural axis with a uniform speed of $100$ revolutions per minute in the Earth's magnetic field. The radius of the wheel is $0.3 \, m$. If the $EMF$ induced between the centre of the wheel and the rim is $3 \pi \mu V$, what is the angle of dip at that place? (Vertical component of the Earth's magnetic field $B_{V} = 15 \mu T$)

An aircraft with a wing-span of $40\, m$ flies with a speed of $1080\, km\, h^{-1}$ in the eastward direction at a constant altitude in the northern hemisphere,where the vertical component of earth's magnetic field is $1.75 \times 10^{-5} \, T$. Then the emf that develops between the tips of the wings is.......$V$

$A$ rectangular wire loop of sides $8 \text{ cm}$ and $3 \text{ cm}$ with a small cut is moving out of a region of uniform magnetic field of magnitude $0.3 \text{ T}$ directed normal to the plane of the loop. The emf developed across the cut, if the velocity of the loop is $2 \text{ cm s}^{-1}$ in a direction normal to the shorter side of the loop, will be: