$A$ circular loop of area $0.01\,m^2$ carrying a current of $10\,A$ is held perpendicular to a magnetic field of intensity $0.1\,T$. The torque acting on the loop is......$N-m$.

Four wires,each of length $2.0\,m$,are bent into four loops $P, Q, R$ and $S$ and then suspended in a uniform magnetic field. If the same current is passed in each,then the torque will be maximum on the loop:

$A$ galvanometer coil has $500$ turns and each turn has an average area of $3 \times 10^{-4} \ m^{2}$. If a torque of $1.5 \ Nm$ is required to keep this coil parallel to the magnetic field when a current of $0.5 \ A$ is flowing through it,the strength of the magnetic field (in $T$) is:

The $(\tau - \theta)$ graph for a current-carrying coil in a magnetic field is:

$(a)$ $A$ circular coil of $30$ turns and radius $8.0 \; cm$ carrying a current of $6.0 \; A$ is suspended vertically in a uniform horizontal magnetic field of magnitude $1.0 \; T$. The field lines make an angle of $60^{\circ}$ with the normal of the coil. Calculate the magnitude of the counter torque that must be applied to prevent the coil from turning.
$(b)$ Would your answer change,if the circular coil in $(a)$ were replaced by a planar coil of some irregular shape that encloses the same area? (All other particulars are also unaltered.)

$A$ circular coil of $30$ turns and radius $8 \,cm$ carrying a current of $6 \,A$ is suspended vertically in a uniform horizontal magnetic field of magnitude $1.0 \,T$. The field lines make an angle of $20^{\circ}$ with the normal of the coil. The magnitude of the counter torque that must be applied to prevent the coil from turning is (in $\,Nm$)