$A$ copper wire $(Y = 1 \times 10^{11} \, N/m^2)$ of length $6 \, m$ and a steel wire $(Y = 2 \times 10^{11} \, N/m^2)$ of length $4 \, m$,each of cross-sectional area $10^{-5} \, m^2$,are fastened end to end and stretched by a tension of $100 \, N$. The elongation produced in the copper wire is ......... $mm$.

Consider a rod of length $1.0 \ m$ with a cross-sectional area of $0.50 \ cm^2$. The rod supports a $500 \ kg$ platform that hangs attached to the rod's lower end. What is the elongation of the rod under the stress, ignoring the weight of the rod (in $mm$)? Consider Young's modulus to be $10^{11} \ Pa$ and $g = 10 \ m \ s^{-2}$.

$A$ $100\,m$ long wire having cross-sectional area $6.25 \times 10^{-4}\,m^2$ and Young's modulus $10^{10}\,N/m^2$ is subjected to a load of $250\,N$. The elongation in the wire will be:

$A$ student performs an experiment to determine the Young's modulus of a wire, exactly $2 \,m$ long, by Searle's method. In a particular reading, the student measures the extension in the length of the wire to be $0.8 \,mm$ with an uncertainty of $\pm 0.05 \,mm$ at a load of exactly $1.0 \,kg$. The student also measures the diameter of the wire to be $0.4 \,mm$ with an uncertainty of $\pm 0.01 \,mm$. Take $g=9.8 \,m/s^2$ (exact). The Young's modulus obtained from the reading is

$A$ wire extends by $1 \ mm$ when a force is applied. If double the force is applied to another wire of the same material and length but half the radius of the cross-section,what will be the elongation of the wire in $mm$?

$A$ metal rod of Young's modulus $Y$ and coefficient of linear expansion $\alpha$ has its temperature raised by $\Delta \theta$. The linear stress required to prevent the expansion of the rod is: