A current I is passing through a wire having | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The drift velocity $v_d$ of electrons in a conductor is given by the formula $v_d = \frac{I}{neA}$,where $I$ is the current,$n$ is the number dens

Vedclass · Accepted Answer

$v_P = \frac{1}{4}v_Q$

Vedclass · Answer

(C) The drift velocity $v_d$ of electrons in a conductor is given by the formula $v_d = \frac{I}{neA}$,where $I$ is the current,$n$ is the number density of electrons,$e$ is the charge of an electron,and $A$ is the cross-sectional area.Since $I$,$n$,and $e$ are constant for both sections,we have $v_d \propto \frac{1}{A}$.The area of cross-section $A$ is given by $A = \pi r^2 = \pi (d/2)^2 = \frac{\pi d^2}{4}$,which implies $A \propto d^2$.Therefore,$v_d \propto \frac{1}{d^2}$.For sections $P$ and $Q$,we have $\frac{v_P}{v_Q} = \left( \frac{d_Q}{d_P} \right)^2$.Given $d_P = d$ and $d_Q = d/2$,we get $\frac{v_P}{v_Q} = \left( \frac{d/2}{d} \right)^2 = \left( \frac{1}{2} \right)^2 = \frac{1}{4}$.Thus,$v_P = \frac{1}{4}v_Q$.

$A$ current $I$ is passing through a wire having two sections $P$ and $Q$ of uniform diameters $d$ and $d/2$ respectively. If the mean drift velocity of electrons in sections $P$ and $Q$ is denoted by $v_P$ and $v_Q$ respectively,then

Similar Questions

$A$ conductor of non-uniform cross-section is connected to a source of constant potential difference as shown in the figure. Then:

The drift velocity does not depend upon

Two identical conductors are kept at the same temperature. If the ratio of the potential difference across them is $1 : 2$,what will be the ratio of their drift velocities?

$A$ copper wire of length $1 \,m$ and uniform cross-sectional area $5 \times 10^{-7} \,m^{2}$ carries a current of $1 \,A$. Assuming that there are $8 \times 10^{28}$ free electrons per $m^{3}$ in copper,how long will an electron take to drift from one end of the wire to the other?

$A$ $1 \mu A$ beam of protons with a cross-sectional area of $0.5 \text{ mm}^2$ is moving with a velocity of $3 \times 10^4 \text{ m/s}$. The charge density of the beam is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module