$A$ potentiometer is an ideal device for measuring potential difference because

It is preferable to measure the $e.m.f.$ of a cell by a potentiometer rather than by a voltmeter because of the following possible reasons.
$(i)$ In the case of a potentiometer,no current flows through the cell.
$(ii)$ The length of the potentiometer wire allows for greater precision.
$(iii)$ Measurement by the potentiometer is quicker.
$(iv)$ The sensitivity of the galvanometer,when using a potentiometer,is not relevant.
Which of these reasons are correct?

To determine the internal resistance of a cell by using a potentiometer, the null point is at $1 \, m$ when the cell is shunted by $3 \, \Omega$ resistance and at a length $1.5 \, m$ when the cell is shunted by $6 \, \Omega$ resistance. The internal resistance of the cell is:

In a potentiometer, the area of cross-section of the wire is $4 \, cm^2$, the current flowing in the circuit is $1 \, A$ and the potential gradient is $7.5 \, V/m$, then the resistivity of the potentiometer wire is

The length of a potentiometer wire is $L$. $A$ cell of e.m.f. $E$ is balanced at a length $\frac{L}{3}$ from the positive end of the wire. If the length of the wire is increased by $\frac{L}{2}$,at what distance will the same cell give a balance point?

Two cells,when connected in series,are balanced on $8 \; m$ on a potentiometer. If the cells are connected such that the polarity of one of the cells is reversed,they balance on $2 \; m$. The ratio of the $e.m.f.$'s of the two cells is: