$A$ rectangular coil of length $0.12\, m$ and width $0.1\, m$ having $50$ turns of wire is suspended vertically in a uniform magnetic field of strength $0.2\, Wb/m^2$. The coil carries a current of $2\, A$. If the plane of the coil is inclined at an angle of $30^{\circ}$ with the direction of the field,the torque required to keep the coil in this position will be .......$Nm$.

$A$ circular loop of area $0.01\,m^2$ carrying a current of $10\,A$ is held perpendicular to a magnetic field of intensity $0.1\,T$. The torque acting on the loop is......$N-m$.

$A$ circular coil of $20$ turns and radius $10\; cm$ is placed in a uniform magnetic field of $0.10\; T$ normal to the plane of the coil. If the current in the coil is $5.0\; A$,what is the
$(a)$ total torque on the coil,
$(b)$ total force on the coil,
$(c)$ average force on each electron in the coil due to the magnetic field?
(The coil is made of copper wire of cross-sectional area $10^{-5} \;m ^{2},$ and the free electron density in copper is given to be about $10^{29}\; m ^{-3}.$)

$A$ uniform current-carrying ring of mass $m$ and radius $R$ is suspended by a massless string as shown. $A$ uniform magnetic field $B_0$ exists in the region to keep the ring in a horizontal position. Determine the current $I$ in the ring.

$(a)$ $A$ circular coil of $30$ turns and radius $8.0 \; cm$ carrying a current of $6.0 \; A$ is suspended vertically in a uniform horizontal magnetic field of magnitude $1.0 \; T$. The field lines make an angle of $60^{\circ}$ with the normal of the coil. Calculate the magnitude of the counter torque that must be applied to prevent the coil from turning.
$(b)$ Would your answer change,if the circular coil in $(a)$ were replaced by a planar coil of some irregular shape that encloses the same area? (All other particulars are also unaltered.)

$A$ solenoid of length $0.4 \ m$ and having $500$ turns of wire carries a current $3 \ A$. $A$ thin coil having $10$ turns of wire and radius $0.1 \ m$ carries current $0.4 \ A$. The torque required to hold the coil in the middle of the solenoid with its axis perpendicular to the axis of the solenoid is $(\mu_0 = 4\pi \times 10^{-7} \ SI \ units, \pi^2 = 10, \sin 90^{\circ} = 1)$.