$A$ square loop $PQRS$ having $10$ turns, area $3.6 \times 10^{-3} \, m^2$ and resistance $100 \, \Omega$ is slowly and uniformly being pulled out of a uniform magnetic field of magnitude $B=0.5 \, T$ as shown. Work done in pulling the loop out of the field in $1.0 \, s$ is . . . . . $\times 10^{-6} \, J$.

$A$ metallic conductor of length $1 \; m$ rotates in a vertical plane parallel to the east-west direction about one of its ends with an angular velocity of $5 \; rad/s$. If the horizontal component of the Earth's magnetic field is $0.2 \times 10^{-4} \; T$,then the emf induced between the two ends of the conductor is .............

$A$ wheel of radius $2 \, m$ having $8$ conducting concentric spokes is rotating about its geometrical axis with an angular velocity of $10 \, rad \, s^{-1}$ in a uniform magnetic field of $0.2 \, T$ perpendicular to its plane. The value of induced emf between the rim of the wheel and the centre is . . . . . . $V$.

Two $U$-shaped tubes are moving inside each other as shown in the figure. If the length of each tube is $l$ and they move with velocity $v$ in a magnetic field $B$,what is the induced $emf$ in the circuit?

$A$ pair of parallel conducting rails lie at a right angle to a uniform magnetic field of $2.0\, T$ as shown in the figure. Two resistors,$10\,\Omega$ and $5\,\Omega$,slide without friction along the rails. The distance between the conducting rails is $0.1\, m$. Then:

$A$ metal rod of length '$L$' completes the circuit as shown. The area of the circuit is perpendicular to the magnetic field '$B$'. The total resistance of the circuit is '$R$'. The force needed to move the rod in the direction as shown with a constant speed '$V$' is