An electric current i_1 can flow in either di | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The magnetic flux $\phi_2$ linked with loop $(2)$ is proportional to the current $i_1$ in loop $(1)$,given by $\phi_2 = M i_1$,where $M$ is the mu

Vedclass · Accepted Answer

Vedclass · Answer

(D) The magnetic flux $\phi_2$ linked with loop $(2)$ is proportional to the current $i_1$ in loop $(1)$,given by $\phi_2 = M i_1$,where $M$ is the mutual inductance.According to Faraday's law of electromagnetic induction,the induced emf $\varepsilon_2$ in loop $(2)$ is $\varepsilon_2 = -\frac{d\phi_2}{dt} = -M \frac{di_1}{dt}$.The induced current $i_2$ is given by $i_2 = \frac{\varepsilon_2}{R} = -\frac{M}{R} \frac{di_1}{dt}$,where $R$ is the resistance of loop $(2)$.From the given graph,$i_2$ is a positive constant value. This implies that $\frac{di_1}{dt}$ must be a negative constant.Therefore,the current $i_1$ must be decreasing linearly with time $t$ (i.e.,having a negative slope).Looking at the options,the graph where $i_1$ decreases linearly with time $t$ corresponds to option $(D)$.

Similar Questions

Alternating current of peak value $(\frac{2}{\pi}) \ A$ flows through the primary coil of a transformer. The coefficient of mutual inductance between the primary and secondary coil is $1 \ H$. The peak e.m.f. induced in the secondary coil is (Frequency of a.c. $= 50 \ Hz$) (in $V$)

Two coils of wire $A$ and $B$ are placed mutually perpendicular as shown in the figure. When the current is changed in any one coil:

$A$ primary coil and a secondary coil are placed close to each other. $A$ current, which changes at the rate of $25 \, A$ in a millisecond, is present in the primary coil. If the mutual inductance is $92 \times 10^{-6} \, H$, then the value of the induced emf in the secondary coil is:

Two coils have a mutual inductance of $0.004 \ H$. The current changes in the first coil according to the equation $I = I_0 \sin \omega t$,where $I_0 = 10 \ A$ and $\omega = 50 \pi \ rad \ s^{-1}$. The maximum value of e.m.f. in the second coil in volt is (in $\pi$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module