In a vernier callipers,$10$ divisions of vernier scale coincide with $9$ divisions of main scale. One division of main scale is of $0.1 \ cm$. If in the measurement of inner diameter of a cylinder,the zero of the vernier scale lies between $1.3 \ cm$ and $1.4 \ cm$ of the main scale and the $2^{\text{nd}}$ division of the vernier scale coincides with a main scale division,then the diameter will be: (in $cm$)

Two full turns of the circular scale of a screw gauge cover a distance of $1 \ mm$ on its main scale. The total number of divisions on the circular scale is $50$. The screw gauge has a zero error of $-0.03 \ mm$. While measuring the diameter of a thin wire,a student notes the main scale reading of $3 \ mm$ and the $35^{\text{th}}$ division of the circular scale coincides with the reference line of the main scale. The diameter of the wire is: (in $mm$)

In a screw gauge,$5$ complete rotations of the screw cause it to move a linear distance of $0.25\, cm$. There are $100$ circular scale divisions. The thickness of a wire measured by this screw gauge gives a reading of $4$ main scale divisions and $30$ circular scale divisions. Assuming negligible zero error,the thickness of the wire is (in $, cm$)

The least count of a screw gauge is $0.01 \ mm$. If the pitch is increased by $75\%$ and the number of divisions on the circular scale is reduced by $50\%$,the new least count will be . . . . . . $\times 10^{-3} \ mm$.

In a screw gauge, there are $100$ divisions on the circular scale and the main scale moves by $0.5\,mm$ on a complete rotation of the circular scale. The zero of the circular scale lies $6$ divisions below the reference line when two studs are brought in contact with each other. When a wire is placed between the studs, $4$ main scale divisions are clearly visible while the $46^{\text{th}}$ division of the circular scale coincides with the reference line. The diameter of the wire is $...........\times 10^{-2}\,mm$.

Consider the diameter of a spherical object being measured with the help of a Vernier callipers. Suppose its $10$ Vernier Scale Divisions $(V.S.D.)$ are equal to its $9$ Main Scale Divisions $(M.S.D.)$. The least division on the $M.S.$ is $0.1 \ cm$ and the zero of $V.S.$ is at $x=0.1 \ cm$ when the jaws of the Vernier callipers are closed. If the main scale reading for the diameter is $M=5 \ cm$ and the number of the coinciding vernier division is $8$,the measured diameter after zero error correction is: (in $cm$)