Overall changes in volume and radii of a unif | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The volume of a cylinder is given by $V = \pi r^2 L$.
Taking the logarithmic derivative,we get $\frac{\Delta V}{V} = 2 \frac{\Delta r}{r} + \frac

Vedclass · Accepted Answer

$4.08 	imes 10^8 \ N/m^2$

Vedclass · Answer

(D) The volume of a cylinder is given by $V = \pi r^2 L$.
Taking the logarithmic derivative,we get $\frac{\Delta V}{V} = 2 \frac{\Delta r}{r} + \frac{\Delta L}{L}$.
Given: $\frac{\Delta V}{V} = 0.2 \% = 0.002$ and $\frac{\Delta r}{r} = -0.002 \% = -0.00002$ (since radius decreases when stretched).
Substituting these values: $0.002 = 2(-0.00002) + \frac{\Delta L}{L}$.
$0.002 = -0.00004 + \frac{\Delta L}{L} \implies \frac{\Delta L}{L} = 0.00204$.
Stress $\sigma = Y 	imes 	ext{strain} = Y 	imes \frac{\Delta L}{L}$.
$\sigma = (2.0 	imes 10^{11}) 	imes (0.00204) = 4.08 	imes 10^8 \ N/m^2$.
Note: The provided options seem to contain a typo in the exponent or magnitude. Based on the calculation,the result is $4.08 	imes 10^8 \ N/m^2$.

Overall changes in volume and radii of a uniform cylindrical steel wire are $0.2 \%$ and $0.002 \%$ respectively when subjected to some suitable force. Calculate the longitudinal tensile stress acting on the wire. (Given: Young's modulus $Y = 2.0 \times 10^{11} \ N/m^2$)

Similar Questions

The length of a metallic wire is $l$. The tension in the wire is $T_1$ for length $l_1$ and the tension in the wire is $T_2$ for length $l_2$. Find the original length $l$.

The Young's modulus of a wire of length $L$ and radius $r$ is $Y \ N/m^2$. If the length and radius are reduced to $L/2$ and $r/2,$ then its Young's modulus will be

The stress versus strain graphs for wires of two materials $A$ and $B$ are as shown in the figure. If $Y_A$ and $Y_B$ are the Young's modulus of the materials,then

$A$ ring of a thin wire of cross-sectional area $a$ and length $l$ is dipped into a liquid of surface tension $\sigma$ and taken out so that a film of liquid is formed in the ring. If Young's modulus of the material of the wire is $Y$,then the longitudinal strain developed in the ring will be:

When a weight of $10 \,kg$ is suspended from a copper wire of length $3 \,m$ and diameter $0.4 \,mm$, its length increases by $2.4 \,cm$. If the diameter of the wire is doubled, then the extension in its length will be (in $\,cm$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module