Student $A$ and Student $B$ used two screw gauges of equal pitch and $100$ equal circular divisions to measure the radius of a given wire. The actual value of the radius of the wire is $0.322 \, \text{cm}$. The absolute value of the difference between the final circular scale readings observed by the students $A$ and $B$ is .... .
Given pitch $= 0.1 \, \text{cm}$.

The main scale of a vernier caliper reads in millimeters and its vernier scale is divided into $8$ divisions,which coincide with $5$ divisions of the main scale. When the two jaws of the instrument touch each other,the zero of the vernier scale coincides with the zero of the main scale. $A$ rod is placed between the two jaws. It is observed that the zero of the vernier scale lies just to the left of the $36^{th}$ division of the main scale and the fourth division of the vernier scale coincides with a main scale division. The measured value is .......... $cm$.

$A$ screw gauge of pitch $0.5\,mm$ is used to measure the diameter of a uniform wire of length $6.8\,cm$. The main scale reading is $1.5\,mm$ and the circular scale reading is $7$. The calculated curved surface area of the wire to appropriate significant figures is $......\,cm^2$. [Screw gauge has $50$ divisions on the circular scale]

Length of $9 \ MSD$ of a vernier caliper are equal to $10 \ VSD$ and $1 \ MSD = 1 \ mm$. For measuring the length of a rod,the reading on the main scale is $6.4 \ cm$ and the $8^{th}$ division on the vernier scale is in line with a marking on the main scale. If there is no zero error,find the length of the rod: (in $cm$)

While measuring the diameter of a wire using a screw gauge, the following readings were noted. The main scale reading is $1 \,mm$ and the circular scale reading is equal to $42$ divisions. The pitch of the screw gauge is $1 \,mm$ and it has $100$ divisions on the circular scale. The diameter of the wire is $\frac{x}{50} \,mm$. The value of $x$ is:

When both jaws of vernier callipers touch each other, the zero mark of the vernier scale is to the right of the zero mark of the main scale, and the $4^{\text{th}}$ mark on the vernier scale coincides with a certain mark on the main scale. While measuring the length of a cylinder, the observer observes $15$ divisions on the main scale and the $5^{\text{th}}$ division of the vernier scale coincides with a main scale division. The measured length of the cylinder is . . . . . . $mm$. (Least count of Vernier calliper $= 0.1 \ mm$)