The range of a voltmeter of resistance $G \ \Omega$ is $V$ volt. The resistance required to be connected in series with it in order to convert it into a voltmeter of range $nV$ volt, will be

Explain the use of a galvanometer as a voltmeter.

Two moving coil galvanometers $A$ and $B$ having identical springs are placed in magnetic fields of $0.25 \ T$ and $0.5 \ T$ respectively. If the number of turns in $A$ and $B$ are respectively $36$ and $48$,and the areas of the coils $A$ and $B$ are $2.4 \times 10^{-3} \ m^2$ and $4.8 \times 10^{-3} \ m^2$ respectively,then the ratio of the current sensitivities of the galvanometers $A$ and $B$ is

When a resistance of $200 \Omega$ is connected in series with a galvanometer of resistance $G$,its range is $V$. To triple its range,a resistance of $2000 \Omega$ is connected in series. The value of $G$ is (in $\Omega$)

In the circuit shown below,the ammeter and the voltmeter readings are $3 \text{ A}$ and $6 \text{ V}$ respectively. Then the value of the resistance $R$ is

Assertion: Voltmeter is connected in parallel with the circuit.
Reason: Resistance of a voltmeter is very large.