The ratio of the areas of cross-sections of three wires is $1:2:3$ and the ratio of the Young's moduli of their materials is $3:2:1$. If the three wires are of the same length and the same stretching force is applied to the three wires, then the ratio of the elongations of the three wires is

The proportional limit of steel is $8 \times 10^8 \, N/m^2$ and its Young's modulus is $2 \times 10^{11} \, N/m^2$. The maximum elongation,a one metre long steel wire can be given without exceeding the elastic limit is ...... $mm$.

$A$ rod of length $L$ at room temperature and uniform area of cross section $A$ is made of a metal having a coefficient of linear expansion $\alpha /^{\circ}C$. It is observed that an external compressive force $F$,applied on each of its ends,prevents any change in the length of the rod when its temperature rises by $\Delta T \, K$. The Young's modulus $Y$ for this metal is:

An aluminum rod (Young's modulus $Y = 7 \times 10^9 \, N/m^2$) has a breaking strain of $0.2\%$. The minimum cross-sectional area of the rod required to support a load of $10^4 \, N$ is:

If the ratio of diameters,lengths,and Young's modulus of steel and copper wires shown in the figure are $p, q$ and $s$ respectively,then the corresponding ratio of increase in their lengths would be

As shown in the figure,in an experiment to determine Young's modulus of a wire,the extension-load curve is plotted. The curve is a straight line passing through the origin and makes an angle of $45^{\circ}$ with the load axis. The length of the wire is $62.8\,cm$ and its diameter is $4\,mm$. The Young's modulus is found to be $x \times 10^4\,N/m^2$. The value of $x$ is