The sensitivity of a galvanometer is $60 \text{ division/A}$. When a shunt is used,its sensitivity becomes $10 \text{ division/A}$. If the galvanometer is of resistance $20 \ \Omega$,the value of shunt used is (in $\Omega$)

$A$ galvanometer may be converted into an ammeter or a voltmeter. In which of the following cases will the resistance of the device so obtained be the largest?

$A$ galvanometer of resistance $50 \Omega$ is connected to a battery of $3 \text{ V}$ along with a resistance of $2950 \Omega$ in series,showing a full-scale deflection of $30$ divisions. The additional series resistance required to reduce the deflection to $20$ divisions is: (in $\Omega$)

In the circuit shown below,the ammeter and the voltmeter readings are $3 \text{ A}$ and $6 \text{ V}$ respectively. Then the value of the resistance $R$ is

$A$ moving coil galvanometer has $N$ number of turns in a coil of effective area $A$,and it carries a current $I$. The magnetic field $B$ is radial. The torque acting on the coil is:

$A$ milliammeter of range $10 \, mA$ has a coil of resistance $1 \, \Omega$. To use it as a voltmeter of range $10 \, V$,the resistance that must be connected in series with it will be ............. $\Omega$.