Two identical long bars A and B made of diffe | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) In the steady state, the heat conducted through the bar is lost to the surroundings through the surface of the bar by convection and radiation. Le

Vedclass · Accepted Answer

$\frac{k_A}{k_B} = \frac{l_A^2}{l_B^2}$

Vedclass · Answer

(C) In the steady state, the heat conducted through the bar is lost to the surroundings through the surface of the bar by convection and radiation. Let $P$ be the perimeter of the bars and $h$ be the heat transfer coefficient. The heat flow rate at a distance $x$ from the hot end is $q = -kA \frac{dT}{dx}$.The heat lost by the element $dx$ to the surroundings is $dQ = hP(T - T_0) dx$.In steady state, the heat balance equation is $-kA \frac{d^2T}{dx^2} = hP(T - T_0)$.Let $	heta = T - T_0$, then $\frac{d^2	heta}{dx^2} = \frac{hP}{kA} 	heta$. The solution is $	heta = 	heta_0 e^{-mx}$, where $m = \sqrt{\frac{hP}{kA}}$.The wax melts up to a length $l$ where the temperature $	heta$ reaches the melting point $	heta_m$. Thus, $	heta_m = 	heta_0 e^{-ml}$.Since $	heta_m, 	heta_0, h,$ and $P$ are the same for both bars, $ml$ must be constant. Therefore, $l \propto \frac{1}{\sqrt{m^2}} \propto \sqrt{k}$.Thus, $\frac{l_A}{l_B} = \sqrt{\frac{k_A}{k_B}}$, which implies $\frac{k_A}{k_B} = \frac{l_A^2}{l_B^2}$.

Two identical long bars $A$ and $B$ made of different materials are coated with wax and have one end immersed in a hot oil bath. When the steady state is reached, the lengths for which the wax melts are $l_A$ and $l_B$. If $k_A$ and $k_B$ are the thermal conductivities of the materials, then:

Similar Questions

The heat is flowing through two cylindrical rods of the same material. The diameters of the rods are in the ratio $1:2$ and their lengths are in the ratio $2:1$. If the temperature difference between their ends is the same,the ratio of the rate of flow of heat through them will be:

One end of a thermally insulated rod is kept at a temperature $T_1$ and the other at $T_2$. The rod is composed of two sections of lengths $l_1$ and $l_2$ and thermal conductivities $K_1$ and $K_2$ respectively. The temperature at the interface of the two sections is

Which of the following cylindrical rods will conduct the most heat when their ends are maintained at the same steady temperature difference?

For cooking the food,which of the following type of utensil is most suitable?

In which case does the thermal conductivity increase from left to right?

Vedclass Test Series

Exam Paper Generator

Online Exam Module