Two identical plates of different metals are joined to form a single plate whose thickness is double the thickness of each plate. If the coefficients of thermal conductivity of each plate are $2$ and $3$ respectively,then the thermal conductivity of the composite plate will be:

The ratio of thermal conductivities of two different materials is $5:3$. If the thermal resistances of two rods of these materials having the same thickness are equal,then the ratio of the lengths of the rods will be:

Why do people prefer to give a layer of sand or foam insulation on ceilings made of concrete?

Two rods $A$ and $B$ of different materials but same cross-section are joined as shown in the figure. The free end of $A$ is maintained at $100^{\circ}C$ and the free end of $B$ is maintained at $0^{\circ}C$. If $l_2 = 2l_1$,$K_1 = 2K_2$ and the rods are thermally insulated from the sides to prevent heat losses,then the temperature $\theta$ of the junction of the two rods is ........ $^{\circ}C$.

Two rectangular blocks,having identical dimensions,can be arranged either in configuration $I$ or in configuration $II$ as shown in the figure. One of the blocks has thermal conductivity $k$ and the other $2k$. The temperature difference between the ends along the $x$-axis is the same in both the configurations. It takes $9 \ s$ to transport a certain amount of heat from the hot end to the cold end in the configuration $I$. The time to transport the same amount of heat in the configuration $II$ is: (in $s$)

Two identical metal rods are welded end-to-end as shown in figure $(1)$. It takes $4 \ min$ for $20 \ cal$ of heat to flow through them. If these rods are now welded side-by-side as shown in figure $(2)$,the time taken for the same amount of heat to flow through them is .......... $\min$.