Two rods of same material and volume having circular cross-section are subjected to tension $T$. Within the elastic limit,the same force is applied to both the rods. If the diameter of the first rod is half of the second rod,then the ratio of the extension of the first rod to the second rod will be: (in $: 1$)

What is the percentage increase in length of a wire of diameter $2.5 \,mm$,stretched by a force of $100 \,kg$ wt? (Young's modulus of elasticity of wire $= 12.5 \times 10^{11} \,dyne/cm^2$)

$A$ metal string $A$ is suspended from a rigid support and its free end is attached to a block of mass $M$. $A$ second block having mass $2M$ is suspended at the bottom of the first block using a string $B$. The area of cross-sections of strings $A$ and $B$ are the same. The ratio of lengths of strings $A$ to $B$ is $2$ and the ratio of their Young's moduli $(Y_A/Y_B)$ is $0.5$. The ratio of elongations in $A$ to $B$ is . . . . . . .

$A$ metal wire with circular cross-section and length $1 \,m$ is pulled with a tensile force of $1000 \,N$ on each side. For the wire to be stretched not more than $0.25 \,cm$, the minimum diameter of the wire required is (Young's modulus of the metal $= 10^{11} \,Pa$, take $\sqrt{\pi} = 1.77$). (in $\,mm$)

The units of Young's modulus of elasticity are

$A$ metallic ring of radius $r$ and cross-sectional area $A$ is fitted into a wooden circular disc of radius $R$ $(R > r)$. If the Young's modulus of the material of the ring is $Y$, the force with which the metal ring expands is